TOWER-GARD 568
TOWER-GARD 568 is based on unique blend of liquid epoxy polymer, toughening resins and aliphatic polyamine curing agents. The use of Kevlar™ fibers helps to gain high application rates. The formulation for this product is uniquely fieldfriendly and uses advanced low toxicity ingredients. Ideal for online application onto cold/sweating surface without a shutdown. With excellent UV resistance, it can avoid the “yellowing” upon exposure to UV light.
CORRO-DUR™ 257 COLD CURE
CORRO-DUR™ 257 COLD CURE is formulated using unique blend of liquid epoxy polymer and aliphatic polyamine curing agents with an inert plasticizer, which is able to displace water from wet surfaces in order to make a permanent bond. CORRO-DUR™ 257 COLD CURE used the solventfree formulation to ensure safety and maximum technical performance. It is uniquely field-friendly and uses advanced low toxicity ingredients.
CORRO-CHIME 390
CORRO-CHIME 390 is solvent-free, elastomeric, and chemically resistant sealant with the consistency of soft putty. The material is extremely adhesive which suitable for steel and concrete. CORRO-CHIME 390 is designed for application where a flexible, corrosion resistant seal or expansion joint is required.
Corro-Dur™ 258
CORRO-DUR™ 258 is formulated based on unique resin system which may be applied to damp or wet surfaces. It is toughened with Kevlar™ fibers to give superior chip resistance and is pigmented with selected hard ingredients enhance wear resistance. This product is suitable for underwater application and gives excellent results for radiation and DBA testing. It can be applied on surfaces such as steel, concrete, FRP and etc.
CORRO-DUR™ 255
CORRO-DUR™ 255 is formulated based on unique CORRO-DUR™ 258 resin system which may be applied to damp or wet surfaces. It is toughened with Kevlar™ fibers to give superior chip resistance and is pigmented with selected hard ingredients enhance wear resistance. This product is suitable for underwater application and gives excellent results for radiation and DBA testing. The resin system used has excellent resistance to commodities.
Corro-Dur™ 290
CORRO-DUR™ 290 is formulated using unique blend of liquid epoxy polymer and aliphatic polyamine curing agents, which is able to displace water from wet surfaces in order to make a permanent bond. The formulation is solvent-free to ensure safety and maximum technical performance. CORRO-DUR™ 290 can be used an anticorrosive coating in splash zones, abrasion resistance above or below water. It can also be applied as encapsulating coating for steel and concrete.
CORRO-DUR™ 2000 (C)
CORRO-DUR™ 2000 (C) is a 100% solids aliphatic polyamine cured solvent-free epoxy coating with solvent-free formulation optimized for application of plural component airless spray above water and by pressure pad below water. CORRO-DUR™ 2000 (C) is self-priming and functions as an anticorrosion coating by providing a tightly adherent, thick protective film. Ideal for dry or underwater online application with service in both immersed and non-immersed conditions for long-term steel protection.
Get a quote now!
© 2022 All rights reserved