CORRO-DUR™ 255
CORRO-DUR™ 255 is formulated based on unique CORRO-DUR™ 258 resin system which may be applied to damp or wet surfaces. It is toughened with Kevlar™ fibers to give superior chip resistance and is pigmented with selected hard ingredients enhance wear resistance. This product is suitable for underwater application and gives excellent results for radiation and DBA testing. The resin system used has excellent resistance to commodities.
CORRO-CHEM™ 330 HHA (C)
CORRO-CHEM™ 330 HHA (C) is designed for applications where resistance to aggressive chemical exposure is of paramount importance. The sophisticated coating formula has excellent resistance to acids, acid fumes and a wide variety of solvents. Designed to be applied online up to 125°C and requires dry condition without a shutdown. Ideal for external tank, pressure vessel, piping lining, high build tank lining, pipe coating & riser protection around splash zones where application must be made to hot surfaces.
TECHNICAL DATA
- Mixing ratio 1:1 by volume
- Pot life Approx. 25 minutes at 25°C (77°F)
- Heat resistance 125°C (continuous), 149°C (intermittent)
- Dry time (to touch) 4 hours at 25°C (77°F)
- Full cure time 72 hours at 25°C (77°F)
- Salt test (ASTM D1654) 10
- Lap shear strength (ASTM D1002) 21,332 kPa
- Pull-off strength (ASTM D4541) 39,934 kPa
- Compressive strength (ASTM D695) 99,973 kPa
CORRO-DUR™ 2000 (C)
CORRO-DUR™ 2000 (C) is a 100% solids aliphatic polyamine cured solvent-free epoxy coating with solvent-free formulation optimized for application of plural component airless spray above water and by pressure pad below water. CORRO-DUR™ 2000 (C) is self-priming and functions as an anticorrosion coating by providing a tightly adherent, thick protective film. Ideal for dry or underwater online application with service in both immersed and non-immersed conditions for long-term steel protection.
Get a quote now!
© 2022 All rights reserved